Specification of filter elements:
- Corrosion resistant end caps.
- Stainless steel support sleeve
- Coarse fleece
- 6 layers of filter media
- Coarse drainage layer
- 2 stainless steel support sleeves
- Fine needlefelt drainage layer
- High chemical and thermal resistance
For use with HVM Threaded
and Flanged Filter Housings
HVM filters are designed for the separation of solid particles, aerosols, oil vapors and odors from non-aggressive
compressed air or industrial gases according to ISO 8573.1 Quality Classes.
Depending on the specific application, the filter housings are provided with different elements:
ISO Quality Class 2
F Series Microfilter elements for the separation of liquids up to 0.1 mg/m³ (0.08 ppm w/w) and solid particles up to 1 micron at 99.99% efficiency..
ISO Quality Class 1
S Series Microfilter elements for the separation of liquids up to 0.01 mg/m³ (0.008 ppm w/w) and solid particles up to 0.01 micron at 99.9999% efficiency.
ISO Quality Class 0
A Series Activated carbon filter elements for the removal of oil vapors up to 0.003 mg/m³ and odors.